AUXITO 7443 Switchback LED Bulbs White/Amber Turn Signal Lights, 7444 LED Bulbs with Projector
Are you tired of amber as a constant DRL when the low beams are on, especially when your front lighting is all cool white LEDs, sorta ruining the all-white look you're after when cruising. But since the turn signals and parking light are integrated with dual filament bulbs, you can't replace it with a white LED bulb because only the amber signal to comply with the law.
Truck enthusiasts often pay attention to each fine detail as they modify their vehicles. With switchback LED lights, your truck can utilize a unique feature that contributes to road safety.
 |
 |
ABOUT AUXITO SWITCHBACK TURN SIGNALS/PARKING LIGHT
The dual color feature makes your road driving safer
These AUXITO Switchback turn signals with a dual color function, they will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal.
The "amber-off-amber-off" AUXITO LED Switchback bulb flashing pattern is different from the "amber-white-amber-white" of other Switchback turn signals on the market and makes your vehicle more noticeable to oncoming drivers. When you're going straight, the Switchback LEDs will switch to white to keep your front lighting consistent!
High brightness
Each bulb has 16pcs high power 3030 led chips for perfect beam pattern, high light output but low consumption
HD glass projector provides a stronger light penetration for better lighting experience.
Avoid signal interference
Wide-range voltage and intelligent constant current IC driver avoid digital and VHF radio signal interference.
 |
 |
High Quality
Heat-resistant Aluminum circuit board for better transfer efficiency. Solid alloy body for better heat dissipation and longer lifespan
Plug and Play
No polarity design,and compatible with both standard and CK sockets. Fit directly into multiple sockets such as: 992, 7440, 7440A, 7440AL, 7440NA, , 7440LL, 7440ST, 7440NA, 7441, 7443, 7443NAK, 7443LL, 7444, 7444NA, 7444NAK, , W21W, WY21W etc
7443 Switchback LED Bulbs Turn Signal Lights Reviews from YouTube
Specification
- Voltage: DC 9-18V
- Current: 0.68A
- LED Type: 3030SMD
- Color: Amber Yellow/White
- Socket Type: Compatible with both CK and US standard sockets
Hear from Customer
"Look great and very bright!!
These work great and give a bit more boost to the headlight brightness. Turn Signal Lights with Build-in Load Resistor work perfectly with no interior quick flashing. True plug-and-play. These new turn signal lights blink a bit more faster than usual. It's like a reduced hyperflashing, I could describe the normal as blinking once every 5 seconds, while these new ones blink once every 3 seconds, but it's not bad at all. I love them and They work great."
 |
 |
 |
*IMPORTANT NOTE
-
These will only work for dual function lights that have both the parking/DRL and turn signal function in one bulb
-
The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in canbus system
Are you tired of amber as a constant DRL when the low beams are on, especially when your front lighting is all cool white LEDs, sorta ruining the all-white look you're after when cruising. But since the turn signals and parking light are integrated with dual filament bulbs, you can't replace it with a white LED bulb because only the amber signal to comply with the law.
Truck enthusiasts often pay attention to each fine detail as they modify their vehicles. With switchback LED lights, your truck can utilize a unique feature that contributes to road safety.
|
|
ABOUT AUXITO SWITCHBACK TURN SIGNALS/PARKING LIGHT
The dual color feature makes your road driving safer
These AUXITO Switchback turn signals with a dual color function, they will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal.
The "amber-off-amber-off" AUXITO LED Switchback bulb flashing pattern is different from the "amber-white-amber-white" of other Switchback turn signals on the market and makes your vehicle more noticeable to oncoming drivers. When you're going straight, the Switchback LEDs will switch to white to keep your front lighting consistent!
High brightness
Each bulb has 16pcs high power 3030 led chips for perfect beam pattern, high light output but low consumption
HD glass projector provides a stronger light penetration for better lighting experience.
Avoid signal interference
Wide-range voltage and intelligent constant current IC driver avoid digital and VHF radio signal interference.
|
|
High Quality
Heat-resistant Aluminum circuit board for better transfer efficiency. Solid alloy body for better heat dissipation and longer lifespan
Plug and Play
No polarity design,and compatible with both standard and CK sockets. Fit directly into multiple sockets such as: 992, 7440, 7440A, 7440AL, 7440NA, , 7440LL, 7440ST, 7440NA, 7441, 7443, 7443NAK, 7443LL, 7444, 7444NA, 7444NAK, , W21W, WY21W etc
7443 Switchback LED Bulbs Turn Signal Lights Reviews from YouTube
Specification
- Voltage: DC 9-18V
- Current: 0.68A
- LED Type: 3030SMD
- Color: Amber Yellow/White
- Socket Type: Compatible with both CK and US standard sockets
Hear from Customer
"Look great and very bright!!
These work great and give a bit more boost to the headlight brightness. Turn Signal Lights with Build-in Load Resistor work perfectly with no interior quick flashing. True plug-and-play. These new turn signal lights blink a bit more faster than usual. It's like a reduced hyperflashing, I could describe the normal as blinking once every 5 seconds, while these new ones blink once every 3 seconds, but it's not bad at all. I love them and They work great."
|
|
|
*IMPORTANT NOTE
-
These will only work for dual function lights that have both the parking/DRL and turn signal function in one bulb
-
The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in canbus system
Original: $32.99
-70%$32.99
$9.90Description
Are you tired of amber as a constant DRL when the low beams are on, especially when your front lighting is all cool white LEDs, sorta ruining the all-white look you're after when cruising. But since the turn signals and parking light are integrated with dual filament bulbs, you can't replace it with a white LED bulb because only the amber signal to comply with the law.
Truck enthusiasts often pay attention to each fine detail as they modify their vehicles. With switchback LED lights, your truck can utilize a unique feature that contributes to road safety.
|
|
ABOUT AUXITO SWITCHBACK TURN SIGNALS/PARKING LIGHT
The dual color feature makes your road driving safer
These AUXITO Switchback turn signals with a dual color function, they will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal.
The "amber-off-amber-off" AUXITO LED Switchback bulb flashing pattern is different from the "amber-white-amber-white" of other Switchback turn signals on the market and makes your vehicle more noticeable to oncoming drivers. When you're going straight, the Switchback LEDs will switch to white to keep your front lighting consistent!
High brightness
Each bulb has 16pcs high power 3030 led chips for perfect beam pattern, high light output but low consumption
HD glass projector provides a stronger light penetration for better lighting experience.
Avoid signal interference
Wide-range voltage and intelligent constant current IC driver avoid digital and VHF radio signal interference.
|
|
High Quality
Heat-resistant Aluminum circuit board for better transfer efficiency. Solid alloy body for better heat dissipation and longer lifespan
Plug and Play
No polarity design,and compatible with both standard and CK sockets. Fit directly into multiple sockets such as: 992, 7440, 7440A, 7440AL, 7440NA, , 7440LL, 7440ST, 7440NA, 7441, 7443, 7443NAK, 7443LL, 7444, 7444NA, 7444NAK, , W21W, WY21W etc
7443 Switchback LED Bulbs Turn Signal Lights Reviews from YouTube
Specification
- Voltage: DC 9-18V
- Current: 0.68A
- LED Type: 3030SMD
- Color: Amber Yellow/White
- Socket Type: Compatible with both CK and US standard sockets
Hear from Customer
"Look great and very bright!!
These work great and give a bit more boost to the headlight brightness. Turn Signal Lights with Build-in Load Resistor work perfectly with no interior quick flashing. True plug-and-play. These new turn signal lights blink a bit more faster than usual. It's like a reduced hyperflashing, I could describe the normal as blinking once every 5 seconds, while these new ones blink once every 3 seconds, but it's not bad at all. I love them and They work great."
|
|
|
*IMPORTANT NOTE
-
These will only work for dual function lights that have both the parking/DRL and turn signal function in one bulb
-
The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in canbus system
